The Gerotor

A Gerotor is a positive displacement pumping unit. The name gerotor is derived from "Generated Rotor". A Gerotor unit consists of an inner and outer rotor. The inner rotor has N teeth, and the outer rotor has N+1 teeth. One rotor is located off-center and both rotors rotate. During part of the assembly's rotation cycle, the area between the inner and outer rotor increases, creating a vacuum. This vacuum creates suction, and hence, this part of the cycle is where the intake is located. Then, the area between the rotors decreases, causing compression. During this compression period, fluids can be pumped, or compressed (if they are gasseous fluids).

A gerotor can also function as a motor. High pressure gas enters the intake area and pushes against the inner and outer rotors, causing both to rotate as the area between the inner and outer rotor increases. During the compression period, the exhaust is pumped out. This is an Otto cycle engine.

An engine created by the Starrotor Corporation combines both uses of a gerotor. It uses the Brayton cycle, the same thermodynamic cycle employed by jet engines. A first gerotor compresses gas, this gas is then ignited in a combustor. The gaseous products of this combustion have a much higher pressure, which drives a second gerotor. Then, some of the output of the second gerotor is used to drive the 1st.