Roots type supercharger

The Roots type supercharger or Roots blower is a positive displacement type device which operates by pulling air through a pair of meshing lobes not unlike a set of stretched gears. Air is trapped in pockets surrounding the lobes and carried from the intake side to the exhaust. The supercharger is typically driven directly from the engine's crankshaft via a belt.

It is named for the brothers Philander and Francis Roots, who first patented the basic design in 1860 as an air pump for use in blast furnaces and other industrial applications. In 1900, Gottlieb Daimler included a Roots-style supercharger in a patented engine design, making the Roots-type supercharger the oldest of the various designs now available.

Out of the three basic supercharger types the Roots has historically been considered the least efficient. However, recent engineering developments by Eaton Corporation has resulted in a new Roots-type supercharger which yields a pump that is more efficient than all previous models. In addition, the Roots-type supercharger is simple and widely used and thus is invariably the most cost efficient. It is also more effective than alternative superchargers at developing compression at low engine rpms, making it a popular choice for passenger automobile applications. Peak torque can be achieved by about 2000 rpm.

All supercharger types benefit from the use of an intercooler to remove heat produced during compression. With a Roots-type supercharger, a thin heat exchanger is adapted to fit in-between the blower and the engine. Water is circulated through it to a second unit placed near the front of the vehicle where a fan and the ambient air-stream can dissipate the collected heat.

The Roots design is commonly used on two-stroke diesel engines, which require some form of forced induction as there is no intake stroke. In this application, the blower does not often provide significant compression and these engines are considered naturally aspirated; turbochargers are generally used when significant "boost" is needed. The Rootes Co. two-stroke diesel engine, used in Commer and Karrier vehicles, had a Roots-type blower but the two names are not connected.

The superchargers used on top fuel engines, funny cars, and other dragsters, as well as hot rods, are in fact derivatives of General Motors superchargers for their diesel engines, which were adapted for automotive use in the early days of the sport. The model name of these superchargers delineates their size; i.e. the once commonly used "6-71" and "4-71" blowers were designed for General Motors diesels having six cylinders of 71 cubic inches each, and four cylinders of 71 cubic inches each, respectively. Current competition dragsters use blowers of 14-71 design.